We are the leading supplier and trader of all kind of Abrasive Blast Machine. We offer Abrasive Blast Machine. These Abrasive Blasting Machine manufactured using the finest grade raw materials procured from our trusted vendors in the market and are strictly in compliance with the prevailing industry standards. Our range is available in different capacities based on the requirements of our clients.
Smallest in our range, this machine is ideal for remedial work, glass etching and general maintenance. Easily transported this machine has a blast time of approx.10-15 mins.
With a continuous blast time of 20/25 minutes, this machine is ideal for the small to medium contract where mobility yet high production is required.
This machine is designed for the medium contractor.It has a continuous blast time of 35-40 minutes.
The largest machine of our standard range,this machine offers a continuous blast time of 45-50 minutes.Ideal for shipyards, of refinaries, gas and heavy fabrication industries.
|Blastline venturi blast cleaning nozzles are available with a choice of liners and in a wide range of styles, sizes and lengths to suit all applications. Most are available with either a 32 mm diameter or 25 mm entry. Customers can also specify the size of locating threads; either fine thread (11. 5 tpi) or the more popular large thread (50 mm), which provides easier location/removal from a nozzle holder. To ensure optimum life, all blastline nozzles should always be used with the appropriate nozzle gasket.|
Listing-out all products under blast nozzles:
Short venturi nozzles:
Short venturi - 1¼” entry, 50 mm thread
the reduced length of these nozzles makes them ideal for areas where access is limited.
Long venturi nozzles:
Aluminium & polyurethane jacketed tc nozzles - 11/4 " x 50mm with all the excellent durability and wear resistance properties of aluminium jacketed nozzles, the tungsten carbide liner is encased in a soft nylon jacket which absorbs shock, reducing the threat of premature failure from liner damage.
The silicon carbide liner in these lightweight nozzles offer improved wear resistance and therefore a longer life than tungsten carbide equivalents. The soft nylon outer jacket absorbs shocks and therefore protects the liner against cracking.
'Angled' tungsten carbide blast nozzles are ideal for cleaning inaccessible areas (e. G. Pipe internals, behind angles) and are available with one, two or three outlets, each in a range of bore sizes. The aluminium jacket protects the liner from ricochet damage.
Use nozzle washers between the hose and nozzle to absorbe the abrasive impact.
The me series of air hose fittings are used to adapt metal pipe on your equipment to accept 2-lug and 4-lug air hose fittings. Our 2-lug me fittings have male npt threads while the larger 4-lug me fittings have female npt threads.
|me 050||2-lug, male npt for 1/2" i. D. Pipe|
|me 075||2-lug, male npt for 3/4" i. D. Pipe|
|me 100||2-lug, male npt for 1" i. D. Pipe|
|fe 125*||4-lug, female npt for 1-1/4" pipe|
|fe 150*||4-lug, female npt for 1-1/2" pipe|
|fe 200*||4-lug, female npt for 2" pipe|
1/2" - 2 - lug male hose end
3/4" - 2 -lug male hose end
1" - 2 - lug male hose end
1-1/2" - 4 - lug male hose end
1-1/2" - 4 -lug male hose end
2" - 4 - lug male hose end
|Blastline can offer you the complete range of fittings and spares of machinery we supply.|
Coalescing oil removal filter:
h x w x l, inches
(h x w x l, cm)
volts, phase, amps
|30 x 42 x 52 "|
(76 x 107 x 132 cm)
|480v, 3ø, 26 a (max)|
|44 x 52 x 100 "|
( 112 x 132 x 254 cm)
|480v, 3ø, 35 a (max)|
|44 x 52 x 100 "|
(112 x 132 x 254 cm)
|480v, 3ø, 57 a (max)|
|45 x 78 x 118 "|
(114 x 198 x 300 cm)
|480v, 3ø, 60 a (max)|
|51 x 78 x 118 "|
(130 x 198 x 300 cm)
|480v, 3ø, 100 a (max)|
A long-lasting heavy-duty hose exceptionally tough and abrasion resistant, for use in sand and steel blasting service; it is manufactured with anti-static rubber granting a complete discharge of static electricity.
Temperature range: -40ºC (-40ºF) to 70ºC (+158ºF)
Tube: Black, smooth with excellent resistance to abrasion; it is anti-static.
Reinforcement: High strength synthetic cord.
Cover: Black, smooth (wrapped finish) highly abrasion resistant synthetic rubber; it is anti-static.
Coils: 125 mt (419 ft) continuous length; 60mt (200ft) or 40 Mt (131 ft) coil available on request.
Other sizes, pressure ratings and colours available on request abrasion loss of rubber compound according to DIN 53516:70±5 on request, available acc. to ISO 3861:1977 specs.
|A full range of quality couplings to suit our range of shotblast hose products. Quick Couplings for fast safe coupling of hoses. All couplings with interconnecting locking lugs adapt to any size available in Cast Iron and Nylon.|